Bushing-type current transformers (PIN version)
Description
In the case of bushing-type current transformers, the customer’s primary wire is pushed through the current transformer opening in the housing. The push-through opening depends on the size of the primary current. Wound primary type current transformers have a primary winding and a secondary winding. Both windings are applied on the closed toroidal core and are isolated from each other by insulation. This principle applies mainly where primary currents are small.
Advantages
- PIN-Connection according to UL 94 V0
- Bushing-type current transformers for direct conductor feedthrough
- Wound primary type current transformer, version for small currents
- Toroidal cores made of high-quality silicon-iron
- Measurement in the low-frequency range 16 2/3 to -400Hz
- High core output power and high-quality insulation (UL)
- circuits primaires et secondaires séparés électriquement
- des formes faciles à monter
- Variable connections, e.g. clamps, plugs, flat-cable plugs, flexible stranded wire or print mounting
- Wide range of housings with various push-through openings
-
- Technical Data
- According to: EN/IEC 61869-1/2
- Primary rated current: 1 – 50 A
- Frequency range: 50 – 400 Hz
| Type | 1 | 3 | 5 | 10 | 25 | 50 | |
|---|---|---|---|---|---|---|---|
| 2 Windings | Through transformer | ||||||
| Primary rated current [A] | IPN | 1 | 3 | 5 | 10 | 25 | 50 |
| Max. Primary rated current [A] | ImaxPN | 1,2 | 3,6 | 6 | 12 | 30 | 60 |
| Secondary current [mA] | IaN | 20 | 20 | 20 | 20 | 200 | 200 |
| Power [VA] | Psek | 0,1 | 0,1 | 0,1 | 0,1 | 0,12 | 0,5 |
| Ratio | KN | 50 | 150 | 250 | 500 | 1000 | 1000 |
| Load resistance [Ω] | RB | 250 | 250 | 250 | 250 | 200 | 200 |
| Load voltage [V] | URB | 5 | 5 | 5 | 5 | 5 | 10 |
| Measuring accuracy 50 Hz [%] | FU | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 | ≤ 1 |
| Ambient temperature [°C] | TA | -25 to + 70 | -25 to + 70 | -25 to + 70 | -25 to + 70 | -25 to + 70 | -25 to + 70 |
| Frequency range [Hz] | f | 50 – 400 | 50 – 400 | 50 – 400 | 50 – 400 | 50 – 400 | 50 – 400 |
| Insulation test voltage [kVac] | VP | 3 | 3 | 3 | 3 | 3 | 3 | Connection [mm²] | 3-4/2-1 | 3-4/2-1 | 3-4/2-1 | 3-4/2-1 | NC/2-1 | NC/2-1 | Weight [kg] | 0,05 | 0,05 | 0,05 | 0,05 | 0,05 | 0,07 | Standards | EN/IEC 61869-1/2 |
| Type | PIN-connection [A] |
h [mm] |
b [mm] |
t [mm] |
DL [mm] |
s [mm] |
l [mm] |
a [mm] |
c [mm] |
| IE/1 | 3-4/2-1 | 34 | 33 | 18 | 9 | 1,0 | 3,5 | 27,5 | 10 |
| IE/3 | 3-4/2-1 | 34 | 33 | 18 | 9 | 1,0 | 3,5 | 27,5 | 10 |
| IE/5 | 3-4/2-1 | 34 | 33 | 18 | 9 | 1,0 | 3,5 | 27,5 | 10 |
| IE/10 | 3-4/2-1 | 34 | 33 | 18 | 9 | 1,0 | 3,5 | 27,5 | 10 |
| IE/25 | NC/2-1 | 34 | 33 | 18 | 9 | 1,0 | 3,5 | 27,5 | 10 |
| IE/50 | NC/2-1 | 38 | 38 | 20 | 13 | 1,0 | 6,5 | 30 | 10 |
