Resistor REOHM BW 156

Max. max continuous power: 1500 W

DESCRIPTION

Braking resistor for drives with frequency converters of low to medium power. Mounting inside and outside the control cabinet is possible.

Advantages

quick connection
short-circuit proof
small dimensions with high performance
very good heat dissipation
highly resistive on overload
optionally with contact protection and temperature switch
optionally also for aggressive environments (e.g. salt mist)
installation is also possible outside the control cabinet compact
also with UL certification see the overview “UL-certified products from REO”

Technical specification

Type	Resistance values R [Ohm] according to E12*	Continuous output P [W] IP20	Continuous output P [W] IP65	max. Operating voltage U [V]
BW 156 / 400 / IP …	1 – 820	400	300	900
BW 156 / 600 / IP …	1 – 820	600	400
BW 156 / 800 / IP …	1,8 – 820	800	500
BW 156 / 1000 / IP …	2,2 – 820	1000	600
BW 156 / 1200 / IP …	2,2 – 820	1200	700
BW 156 / 1500 / IP …	2,7 – 820	1500	800

*Other resistance values on request.

DIMENSIONS IN MM

Type	Dimensions								Connection cable
Type	L1 [mm]	L2 [mm]	L3 [mm]	L4 [mm]	B1 [mm]	B2 [mm]	H [mm]	D [mm]	Connection cable
BW 156 / 400	170	155	140	500	104	70	53	4,5	IP20 PTFE AWG14
BW 156 / 600	230	215	200	500	104	70	53	4,5
BW 156 / 800	300	285	270	500	104	70	53	4,5
BW 156 / 1000	370	355	340	500	104	70	53	4,5
BW 156 / 1200	450	435	420	500	104	70	53	4,5

DIMENSIONS IN MM

Type	Dimensions								Connection cable
Type	L1 [mm]	L2 [mm]	L3 [mm]	L4 [mm]	B1 [mm]	B2 [mm]	H [mm]	D [mm]	Connection cable
BW 156 / 400	174	159	140	1000	104	70	53	4,5	IP65 shielded Connection cable 3 x 1,5 mm²
BW 156 / 600	234	219	200	1000	104	70	53	4,5
BW 156 / 800	304	289	270	1000	104	70	53	4,5
BW 156 / 1000	374	359	340	1000	104	70	53	4,5
BW 156 / 1200	454	439	420	1000	104	70	53	4,5
BW 156 / 1500	604	589	570	1000	104	70	53	4,5

Contact protection / cover

Type	Measurements
Type	L1 [mm]	L2 [mm]	B1 [mm]	B2 [mm]	H [mm]	D [mm]
BW 156 / 400	300	270	200	150	140	7,0 x 10,0
BW 156 / 600	360	330	200	150	140	7,0 x 10,0
BW 156 / 800	430	400	200	150	140	7,0 x 10,0
BW 156 / 1200	580	550	200	150	140	7,0 x 10,0
BW 156 / 1500	730	700	200	150	140	7,0 x 10,0

Other covers available on request.

With low resistance values, the conductor cross-section is adapted to the current.

The resistance values refer to standard products with a standard tolerance of +/- 10 % with an ambient temperature of 20 °C. The resistance value insignificantly changes in function of the winding temperature. Therefore, resistance changes of approx. +10 % in comparison to the cooled-down conditions may occur.