AC Magnet REOVIB WI 721
Powder-coated version DESCRIPTION Powder-coated design in full encapsulation at 900 rpm, 1500 rpm, 3000 rpm or 6000 rpm, power outputs up to 3900 VA Mounting with blind tapped holes at the base of the magnet and armature Cable exit downwards with unshielded or shielded cable The use of a new coating technology allows us to design the vibrating magnet in the WI 721 series to be smaller. This results in significant savings in terms of weight, material, and space requirements. This optimized surface coating also ensures consistently high performance without the usual power losses that can occur with other systems. The advantages of this new coating are manifold: Use in the pharmaceutical industry Use in the food processing industry with FDA conformity Corrosion protection High temperature resistance Non-flammable Cold resistant Homogeneous coating Resistant to solvents High abrasion resistance Thanks to these properties, the WI 721 series is ideally suited for demanding applications, especially in environments that require high standards of hygiene, durability, and performance. Advantages Corrosion protection by means of powder-coating FDA compliant (Food and Drug Administration) Optimal size/performance ratio Good adjustability Maximum power 3900 VA Also for low-frequency applications Maximum tractive power 6900 Low Profile Typical applications Packaging industry and weighing sector for feeding and sorting processes. Automation process and assembly equipment which utilizes electromagnetic drives.Particularly suited for the food processing sector and the pharmaceutical sector (FDA compliant) Technical specification Types Max. Nominal air gap[mm] Performance with 6000 1/min [VA] Rated current = thermal rated current at 230V [A] Peak tensile force at nominal air gap [N] Performance with 3000 1/min [VA] Therm. rated current at 230V [A] Peak tensile force at nominal air gap [N] Weight magnet [kg] Weight anchor [kg] REOVIB WI 721/10 2,5 320 1,4 230 280 1,2 229 2,1 0,34 REOVIB WI 721/12 3 450 1,95 330 425 1,85 318 2,8 0,62 REOVIB WI 721/14 3 1200 5,2 850 1200 5,2 1410 6,9 1,45 REOVIB WI 721/16 3 2200 9,5 1590 1890 8,2 2620 10,5 2,6 REOVIB WI 721/18 3 – – – 3900 16,9 6900 28 9 DIMENSIONS IN MM Types a [mm] b [mm] c [mm] d f1 f2 f3 g h [mm] i p r REOVIB WI 721/10 100 68 67 – 62,5 12,5 9 67 39 18,5 30 M6 REOVIB WI 721/12 100 100 67 40 62,5 15,5 9 67 71 18,5 30 M6 REOVIB WI 721/14 155 110 109 – 91,5 23,5 15 109 69 27,5 50 M10 REOVIB WI 721/16 155 168 109 80 91,5 23,5 15 109 127 27,5 50 M10 REOVIB WI 721/18 230 170 170 65 129,5 42,5 18 170 121 48,5 75 M12 Certifications
Phase angle controllers REOVIB SMART SYSTEM MINI
IP00, for assembly on a DIN rail Description REOVIB SMART SYSTEM MINI basic module REOVIB SMART SYSTEM basic module in open design for assembly on a DIN rail with an outputchannel of max. 6A with fill level/overflow control.The basic module has a supply for expansion modules, so further output modules up to a totalcurrent of 10A can be connected. REOVIB SMART SYSTEM MINI expansion module In open design for DIN rail mounting. An expansion module has one output channel max. 1A and can be set up together with the basic module and several expansion modules. Advantages Cost-effective phase-angle control systems with vital functionality Can be used as a standalone device or in modular design for control of a complete feed system Output current up to 6A DIN rail mounting Versions available with fill level/overflow control Typical applications Weighing systems, multiple-head weighing wagon, conveyor & assembly automation, sorting systems Technical specification Type SMART mini Basic module SMART mini Expansion module Mains input 110/ 230 V autom. recognition via SMART mini Basic module Mains frequency 50 / 60 Hz +/- 3 Hz via SMART mini Basic module Output voltage 20 … 100V/ 40…210 V 20 … 100V/ 40…210 V Output current max. 6 A max. 6 A Vibration frequency 50 … 100 Hz (60 / 120 Hz) 50 … 100 Hz (60 / 120 Hz) Setpoint value Poti, 0 … 10 V, 0 (4) … 20 mA Poti, 0 … 10 V, 0 (4) … 20 mA Ext. Enable 24 V DC, Switch 24 V DC, Switch U min / U max internal potentiometer internal potentiometer Soft start fixed fixed Max. Output current from all outputs 15 A – Fill level / overflow control – – Conformity CE, RoHS CE, RoHS Protection class IP00 IP00 Data sheet Download our extensive catalog and discover many other REO products. Download Data sheet Certifications
Phase angle controllers REOVIB SMART 6A
IP54 or IP20 Description The REOVIB SMART series includes phase angle control units for use in vibratory conveyor applications. The devices offer the most important functions for use in vibratory conveyor technology and therefore represent a cost-effective option for controlling vibratory conveyors – and in a high-quality design. The devices are available in various protection classes – as a control cabinet installation module in IP20 or as a housing variant in IP54 for direct mounting on the application. The housing variants with protection class IP54 are available in different versions: Input cable/output cable Input cable/output socket Complete cable connection solution for mains, output and control connections The REOVIB SMART ATS 100 devices are available in an IP54 housing design with output currents up to 15 A and are UL-listed. Advantages Cost-effective phase-angle control systems with vital functionality IP54-Version for mounting directly on the vibrating machine or IP20-Version fas a module for mounting in a switch cabinet Versions available with UL approval (SMART ATS 100) Output current up to 6A Typical applications Conveyor & assembly automation, sorting systems Technical specification Mains input 110/ 230 V switchable Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 20 … 100V/ 40…210 V Output current max. 6A Vibration frequency50Hz 50 Hz / 100 Hz Vibration frequency 60Hz 60 Hz / 120 Hz Setpoint value Poti, 0 … 10 V, 0 … 20 mA Ext. Enable 24 V DC, Switch Setting Umin/ Umax Internal potentiometer Soft start fixed Mains voltage compensation – Conformity CE, RoHS Protection class IP20/ IP54 Ambient temperature 0…45°C Data sheet Download our extensive catalog and discover many other REO products. Download Data sheet Certifications Optional UL-certified
Phase angle controllers REOVIB SMART-MIC
IP54 or IP20 Description In contrast to the previous model, the new built-in LED display allows exact values to be set the same way every time. This ensures more precise settings and easier traceability of the entries. Thanks to the connection to Industry 4.0 and IIoT readiness, with the REOVIB SMART-MIC you are already securing the possibilities for the communication technology of the future. Just like the predecessor devices, the devices in the REOVIB SMART-MIC series are also available in various protection classes – as a control cabinet installation module in IP20 or as a housing variant in IP54 for direct mounting on the application. The housing variants with protection class IP54 are available in different versions: Input cable/output cable Input cable/output socket Completely pluggable with input plug and output socket In addition to the functions and benefits of the REOVIB SMART series, the control unit has mains voltage compensation for constant amplitude and an adjustable soft start ramp time. Advantages LED display Mains voltage compensation IP54-Version for mounting directly on the vibrating machine or IP20-Version fas a module for mounting in a switch cabinet Output current up to 6A Typical applications Conveyor & assembly automation, conveyor technology, sorting systems Technical specification Mains input 110/ 230 V switchable Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 20 … 100V/ 40…210 V Output current max. 6A Vibration frequency50Hz 50 Hz / 100 Hz Vibration frequency 60Hz 60 Hz / 120 Hz Setpoint specification LED display,0 … 10 V, 0 (4) … 20 mA* Ext. Enable 24 V DC, Switch Umin/ Umax setting LED display (IP54) / potentiometer (IP20) Soft start adjustable 0…60 Sec. Mains voltage compensation ✓ Conformity CE, RoHS Protection class IP20/ IP54 Ambient temperature 0…40°C * Optional for IP54 Data sheet Download our extensive catalog and discover many other REO products. Download Data sheet Certifications
Frequency converter REOVIB MFS 158
IP54 or IP20 Description Frequency converters in the REOVIB MFS 158 and REOVIB MFS 168 series for vibratory conveyor technology offer the option of operating the vibratory conveyor at an optimal vibration frequency for the material – completely independently of the mains input frequency. Devices in the REOVIB MFS 158 series are available with a max. output current of 4 A and the devices in the REOVIB MFS 168 series are available with a max. output current of 3 A, 6 A and 8 A. Both series are available as IP20 versions for installation in control cabinets or as IP54 standalone units. The IP54 housings are available with various connection options: Input cable/output cable Input cable/output socket Complete cable connection solution for mains, output and control connections Advantages Inexpensive frequency-control devices with the vital functionality Frequency-control device for controlling a vibratory conveyor independently of the mains input frequency Conveyor frequencies are adjustable between 35…140 Hz Mains voltage compensation with constant vibration amplitude All settings can be made using the integrated display Sinusoidal output current Can be used on 110 V or 240 V autom. Detection User settings can be stored Versions available with fill level/overflow control Versions available in various protection classes and connector options Technical specification Mains input 110/ 230 V autom. recognition Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 0 … 100V/ 0…205 V Output current max. 4 A Vibration frequency 35 … 140 Hz Setpoint value Display, Poti, 0 … 10 V, 0 (4) … 20 mA Status signal Relais changer 250 V, 1 A Ext. Enable 24 V DC, Switch Sensor supply 24 V DC Setting Umin/ Umax Display Soft start adjustable 0…4 Sec. Fill level/overflow control PNP, 24 V DC (Option) Coarse/fine control ✓(Option) Vibration amplitude control – Resonant frequency search – Mains voltage compensation ✓ Conformity CE, RoHS Protection class IP20/ IP54 Data sheet All data and configurations can be found in our product data sheet. https://reo.de/wp-content/uploads/2024/07/FREQUENZUMRICHTER-REOVIB-MFS-158.pdf> Certifications
Frequency converter REOVIB MFS 368
IP54 or IP20 FREQUENCY CONVERTER REOVIB MFS 368 More technology in the same design – that’s the motto of the new REOVIB MFS 368. The new devices consume up to 45 % less power and therefore not only deliver a better energy balance, but also ensure a reduction in operating costs. This is achieved by compensating for reactive power. The lower energy consumption has an environmentally friendly effect by reducing CO₂ emissions. In addition, the frequency inverters for vibratory conveyor technology boast a wide input voltage range of 99 V to 264 V with a constant output voltage of max. 205 V. They also offer the option of operating the vibratory conveyor at an optimum vibration frequency for the material being conveyed, making it completely independent of the frequency of the supplying electrical network. The device can therefore be used anywhere in the world. Where previously several different conveyors or magnets were required, one REOVIB MFS 368 is now sufficient. In addition, it is possible to automatically determine the resonance frequency of the oscillation system and to control the oscillation amplitude to constant values using the ACC control method developed by REO. The advantage here is that the conveyor automatically operates at the optimum conveying capacity regardless of the load or mechanical setting. This means that no time-consuming adjustment of the conveyor is necessary. The new REOVIB MFS 368 also ensures optimum and maximum conveyor performance at all times, e.g. with ageing springs, changing mechanical loads or voltage fluctuations. The new inverter has an integrated active mains filter, which saves additional costs for an external mains filter and reduces power consumption, as well as an LCD display with full text display. An optional temperature sensor for magnets can be connected, which ensures that there are no failures due to defective magnets. This increases the operational reliability of the systems. The devices can be optionally equipped with fieldbus interfaces and are available in versions with UL/CSA certification. This enables uncomplicated use in systems in the USA and Canada without any effort or testing. The devices in the REOVIB MFS 368 series are available with a maximum output current of 3 A, 6 A, 8 A and as IP20 switch cabinet installation versions as well as IP54 housing versions. The IP54 enclosures can be supplied with various connection options: Input cable/output cable Input cable/output socket Completely pluggable with input plug, output socket and sensor and actuator connectors Advantages Reduction of harmonics and thus mains perturbations energy efficiency through reactive power compensation active power is taken from the supply network output voltage of 205 V with an input voltage range from 99 V to 264 V LCD display with full text menu Short circuit detection output current limitation possibility (as an option) of connecting an external thermal contact for temperature monitoring of the magnets extra 24 V valve outlet as an option Interchangeable fieldbus interface The communication interface can be configured according to your own requirements Typical applications Conveyor & assembly automation, sorting systems Technical specification Input voltage 99 V … 264 V Mains frequency 50 / 60 Hz +/- 3 Hz Output voltage 0…205 V Output current max. 3 A / 6 A / 8 A Vibration frequency 20 … 140 Hz *¹ Setpoint setting LCD Display, 0 … 10 V, 0 (4) … 20 mA Status signal Relay changer 24 V, 1A Ready signal Relay changer 24 V, 1A Ext. Enable 24 V DC, Switch Valve outlet 24 V, 100 mA Sensor supply 24 V DC Setting Umin/ Umax LCD Display Soft start adjustable 0…60 Sec. Soft stop adjustable 0…60 sec. Level control/ accumulation control PNP, 24 V DC Coarse-/fine control ✓ Vibration amplitude regulation ✓ Resonant frequency search ✓ Resonant frequency control ✓ Selectable cycle operation ✓ Sensor – Time Out control * ✓ Mains voltage compensation ✓ Short circuit detection ✓ Output current limitation ✓ Connection for thermal contact for magnet temperature monitoring (Option) ✓ Extra 24V valve outlet as an option *¹ ✓ Field bus interfaces ProfiNet, EtherNet/IP, EtherCat, Profibus-DP, CAN-Bus, DeviceNet, Conformity CE, RoHS, UL optional Protection class IP20, IP54 Ambient temperature 0…40°C * For IP54 *¹ Other frequencies on request Data sheet Download our extensive catalog and discover many other REO products. Download Data sheet Zertifizierung Interfaces
3-phase thyristor power controller REOTRON MDW 700
3-phase thyristor power controller Description The REOTRON MDW power controllers are used in industrial process engineering and especially in thermal engineering systems. The thyristor controllers are available as phase-angle devices and with period group control and have internal voltage, current and power controllers – so the output power remains stable even with high requirements. The devices can work both directly on the load to be regulated (e.g. in infrared heaters) and as primary controllers of transformers for voltage adjustment and safe isolation (e.g. in graphite heating elements). Thyristor controllers of the REOTRON MDW series (3 controlled phases) are modern microprocessor-controlled devices with integrated measuring devices for the actual values of voltage and current transformers. Outputs (actual value monitor) with 0…+10V, DC are available for processing the actual values in external system components. Communication with the devices can take place via analog interfaces 0… +10 V, DC, 0(4)… 20 mA, potentiometers or field bus systems Profibus-DP, CAN bus, DeviceNet, EtherNet/IP, ProfiNet and EtherCAT, thus enabling integration into existing bus systems. The devices can be adapted to the respective load conditions via internally adjustable parameters Umax, Imax, Pmax as well as ramp-up ramp and ramp-down ramp. The REOTRON MDW 700 thyristor controllers are designed as switch cabinet installation devices with protection class IP 20 for mounting on a mounting plate. The cooling type is air cooling, fans are integrated from 150 A. The devices in the REOTRON MDW-WK series are designed for water cooling and can be easily integrated into an existing water circuit. Advantages phase-angle or burst-fire controllers measuring of effective values connection via analog interfaces, potentiometers or field bus systems Air or water- cooling installation device for control cabinets Technical specification REOTRON MDW 700-10 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 10 A REOTRON MDW 700-25 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 25 A REOTRON MDW 700-50 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 50 A REOTRON MDW 700-80 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 80 A REOTRON MDW 700-110 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 110 A REOTRON MDW 700-150 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 150 A REOTRON MDW 700-200 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 200 A REOTRON MDW 700-300 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 300 A REOTRON MDW 700-115* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 115 A REOTRON MDW 700-160* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 160 A REOTRON MDW 700-250* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 250 A REOTRON MDW 700-350* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 350 A REOTRON MDW 700-450* 3 x 400 V AC, +/- 10% 3 x 0…400 V 3 x 450 A Load Type Resisive/ Induktive Target Value: Storm, Voltage, Power 0…+10 V, DC 0(4)…20 mA Internal keyboard Interface (optional) Profibus-DP, CAN-Bus, DeviceNet, EtherCAT Release Input 24 V, DC, external contact (potential-free) Status update ready , status update power on Relay, changeover contact Relay, changeover contact Display for effective value : Current/Voltage 0…+10 V, DC Betriebstemperatur 0…+45°C Storage/ Transport temperature -10…+70°C IP Code IP 20 * with water cooling
1-Phase thyristor-controller REOTRON MEW 700
The REOTRON MEW power controllers are predestined for applications in the process industry, especially in thermal engineering systems.
1-Phase thyristor-controller REOTRON EW 514
The REOTRON EW 514 is a single-phase thyristor power regulator for load currents up to 6 A.
The control electronics are isolated from the mains voltage. The REOVIB 509 is designed for controlling bowl or linear feeders up to 15 A current rating. The output frequency 50Hz/100Hz (60Hz/120Hz) is selected to suit the feeder. In the regulation circuit there is built-in compensation for mains variations.
DC-Power supply REOTRON SMP-LM
The DC power supplies from the REOTRON SMP series are primary switched-mode power supplies with galvanic isolation from the input to the output. The devices can be used as voltage, current or power regulators.