Accessories
DESCRIPTION
The REOMED Isonet network isolator is used for galvanic isolation of devices in copper cable-based Ethernet networks The separation protects the device and people from the effects of possible electrical voltage peaks on the network cables. Potential equalisation currents via the network cable shielding are reliably prevented.
ADVANTAGES
- Protection in both transfer directions
- Interruption of the shield connection of the network cable
- No additional power supply required
- No software installation required
- Maintenance-free
- RoHS compliant
- EN 60950-1
- EN 60601-1
| Isolation voltage | 4 kV |
| Input/ Output connector | RJ45 |
| Supported network protocols | 10BaseT, 100BaseTx, 1000BaseT |
| Insertion loss | -1,3 max dB |
| Return loss | -8 min. dB |
| Protection rating | IP 20 |
| Max. voltage of the connected devices | 250 Vac ms |
| Operating temperature | -10 to +70 °C |
| Storage temperature | -40 bis +85 °C |
| Air humidity | 10 to 90 % (without condensation) |
| Gehäuse | Kunststoff |
| Weight | 45 g |
| Dimensions [H x B x T] | 25 x 66 x 40 mm |
